Madrigal Imaging MP-8 Manual de usuario descargar pdf (Pagina 70)

The following options are available while performing any of the manual

convergence routines:

Convergence on Image

When a convergence method is first selected, an internally generated

crosshatch test pattern is displayed. Alternatively, you may override the

use of the test pattern and have the external image displayed. Press to

cycle to the external image.

Convergence Reset

During convergence, the following reset options are available:

• Press to reset red and blue convergence – static and dynamic.

• Press to reset red and blue convergence – static only.

• Press to reset red and blue convergence – dynamic only.

“Static” refers to the complete image. “Dynamic” refers to a zonal area.

Note: Allow the projector to warm up for at least forty five minutes prior to

convergence registration.

Guided ➤

Convergence

Press from the Convergence menu to select Guided Convergence. An

internally generated crosshatch is displayed for the alignment. Initially, a red

and green crosshatch is displayed and a rectangular box surrounds the center

convergence zone. Use , , , and to move the red onto the green in

the zone. Press to similarly move the blue onto the green. These first

two adjustments adjust the position of the red and blue images with respect

to the green over the entire screen (static adjustments). The adjustments to

follow (dynamic), modify color positioning within individual zones.

Press to move the rectangular box to the next convergence zone. Again,

use the arrow keys to adjust the red on the green. Press to adjust the

blue on the green.

ENTER

OPERATION

3.28

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 137 138

Sin comentarios

Madrigal Imaging MP-8 Manual de usuario Pagina 70